To order call

856-982-5607 or email vitallimits@gmail.com

Shipping / tax may apply if necessary.

Most popular single sidebar with front straight-mount kit; it is a single side kit, weighs 2.2 oz and only retails for $99.95. The kit includes the following components:

• 1 - AST515 (AeroStab 5/16"-24 Hollow Stud T25 in GR5 Titanium ( 1.5"))
• 1 - ASTFMQ (AeroStab Front Mount with Quick Release Receiver with O-ring and Ti-spacer)
• 1 - ASTBSM (Aerostab Bow Side mount with O-ring)
• 1 - ASTBSS (AeroStab Bow Side Mount Single Side Bushing)
• 1 - ASTELB (AeroStab Elbow Link with O-ring)
• 1 - ASTELQ (AeroStab Elbow Link with O-ring and Quick Release Receiver)
• 2 - ASTHBS (AeroStab 5/16"-24" x 3/8" Hollow 1/2" Button Screw T40 in GR5 Titanium with GR2 Spacer)
• 2 - ASTQRP (AeroStab Quick Release Pin)

Bars are additional cost.

GR5 Titanium Stabilizer bars.  All bars have built in 5/16"-24 thread on both ends.  The male end has an O-ring and 0.55"/14mm hollowed thread stud while the female end can receive up to 0.7"/18mm of thread.  Both ends has a pair of 10mm wide, 10mm thick slots space so you can use a wrench on it for tightening.

Comes in

Length Weight inch / oz.
4.75inch 1.34oz $34.95
9.50inch 2.20oz $49.95
15.75inch 3.50oz $89.95
27.50inch 5.80 oz $109.95

Crossbow Picatinny Lower Front set is to be used on a crossbow with Picatinny rail at the lower front. You will have to add the bars, studs at the front of the bars, and the weights to complete functional kit. Please note that the sling receiver on it will no longer be useable due to the presence of the elbows.

Kit includes:
* 1 AeroStab Crossbow Picatinny Rail Mount with GR5 Screw and Sling receiver
* 2 AeroStab Elbow Link
* 2 AeroStab Elbow Link with Quick Release Receiver
* 2 AeroStab Quick Release
* 4 AeroStab 5/16"-24 x 3/8" Hollow 1/2" Button Screw T40 in GR5 Titanium with GR2 Spacer

$124.95

(For stabilizers options see GR5 Titanium Stabilizer bars above in other section for pricing / length options. Weights and studs below. )

A crossbow stabilizer mount that utilizes the Picatinny under Rail.  With this mount, a full blow dual elbow, and three-axis stabilizer system can be utilized for accurate freehand hunting situations.

• Made of 7075T5 Aluminum and Type II anodize

• Designed as the start of crossbow stabilizer system to be mounted on a Picatinny Rail.

• Comes with a tightening screw made of GR5 Titanium.
  
  Price $29.95

Stabilizer Weights are machined stainless steel parts and have undergone vacuum annealing process to achieve a much higher HRC rating and to make them extra durable.  All Stabilizer Weights have our patent-pending O-ring on one side to ensure tight fit and to minimize loosing caused by vibration or shock.  All Stabilizer Weights have a standard 5/16"-24 thread in the middle.  To make it less prone to damage surrounding objects, we have added O-rings to the outside parameter of the weights. 

Stabilizer Weights come in 4 weight sizes, 1, 2, 4, and 8 oz and have an outside diameter (OD) of 34mm/1.375", and 37mm/1.45" with the O-ring installed, while their thickness are 5.25mm/0.19", 9.55mm/0.36", 18mm/0.71", and 36.6 mm/1.425" respectively.  Stabilzer Weights are finished to have the same hue and color as the other greenish grey components of Stabilzer making them both good for hunting as well as for target shooting.

1 oz $14.95
2 oz $19.95
4 oz $24.95
8 oz $29.95

1.00 inch $10.95
1.50 inch $11.95
2.00 inch $12.95
2.75 inch $14.95